TeraFlex High Steer Knuckle - Retail Price $380.99

 Click Add to Cart for Sam's Special Price  

The Tera Flex Dana 30 High-Clearance Steering Upgrade replaces the outer knuckle on the passenger's side with a new, custom-manufactured high-clearance steering knuckle.

By raising the steering arm position, the kit restores the drag link's factory position and returns ride quality to stock levels. Fits TJ, XJ, and YJ Dana 30 Front Axles. Part # 990

Warning! If you own a TJ, ZJ or YJ your factory tie rod and drag length will be to short after installing the new Tera High Steer Knuckle. Please check out the Sam's Offroad HD Tie Rod and Drag Link System below.

---

Tera Flex High Steer System Dana 30/44

The Tera Flex steering system includes a HD tie rod and drag link with one ton tie rod ends & tapered inserts, and the HD cast high steer knuckle.

NOTE: The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the Tera Flex high steer system. These modifications may include front swaybar links, front track bar mounting, and offset wheels.
 

---

SAMS OFFROAD HEAVY DUTY TIE ROD & DRAG LINK 

New Tie Rod & Drag Length with Jam Nuts and New ends for Jeep CJ and YJ Sam's Price $299.95  New Tie Rod & Drag Length with Jam Nuts and New ends for Jeep TJ & and XJ Sam's Price $299.95

Beef up your 1997-06 Jeep tie rod & drag link with this heavy duty 1 Ton unit. Tubes Are DOM 1-1/4 in. Dia. 1/4 in thick.
Kit comes with 4 tie rod ends, 2 Rods & the steering stabilizer bracket.
 

---

High Steer Tie Rod and Drag Link Brackets

Dana 44 Steering Brackets

Dana 60 Steering Brackets

The Dana 44 and Dana 60 High Steer Brackets cost $275.00 a pair. If you need just one to use for your drag link, the price is $140.00. This is popular for spring over conversions to keep the drag link from hitting your leaf spring.

Dana 44 High Steer Brackets (pair) $275.00

Dana 44 High Steer Bracket (single) $140.00  

Dana 60 High Steer Brackets (pair) $275.00

Dana 60 High Steer Bracket (single) $140.00

---

Dana 60 High Steer Arms w/Hardware

CNC machined Dana 60 high steer arms have a GM taper.
Can be drilled out for Hydraulic steering system
and has optional 5th stud that will fit some aftermarket knuckles.

  4 Bolt Dana 60 High Steer Brackets (pair) $269.00

 5 Bolt Dana 60 High Steer Brackets (pair) $285.00

 

---

 

We want to be your # 1 source! Contact us with your best deal and we'll try to beat it!

(918) 446-5535

Open Monday through Friday 9:00 am to 5:00 pm Central Time