M.O.R.E. Cages

Sam's Offroad Equipment carries the Mountain Offroad Bolt-In Sport Cage for TJ's. This long awaited item has all of the features that our YJ cage has and MORE! It bolts in, no drilling to the body tub, fits with hard and soft tops, full hard doors or half hard doors. It uses two curved bars to attach to the factory roll bar in place of the stock horizontal bars that attach to the windshield frame. The cross bar connects the left and right curved bars together. The stock latches for the top will clear the cross bar and the sun visors work fine. The soft top door surrounds fit like a glove around the Sport Cage side bars.

The Mountain Offroad Sport Cage Part # WCK200 fits 1997-2000 Jeep® TJ Wrangler vehicles. It will fit with hard top, or soft top, full hard doors or half hard doors. It uses two curved bars (left & right) to attach to the factory roll bar (with factory "stubs") in place of the stock horizontal bars (that attached to the windshield frame). The cross bar connects the left & right side bars together just behind the windshield frame.

It comes with "L" brackets that bolt into the stock holes in the windshield frame and then bolt to the Sport Cage. The stock latches for the top will clear the Sport Cage cross bar, and the sun visors can be retained in the stock location. Full hard door window cranks will roll with the doors closed. The factory soft top door surrounds attach to the left and right side bars just like the stock horizontal bars. No drilling to the TJ body tub is required!

The footplates have a pre-welded and threaded stub that inserts into the floor drain hole, then a 9/16" bolt threads into this stub from the bottom side! All necessary hardware is provided. An optional Frame Tie-In Kit (part # FTK200) is NOW available! It is shipped bare steel, un-painted. This Sport Cage has been designed to be as easy to install as possible.

TJ Wrangler Sport Cage $330.00
(UPS Shippable)

Click here for more pictures!

Bolt-In Sport Cage for 1987-1995 Jeep® Wrangler:

	Easy installation, bolts to factory roll bar. Retains factory padding, sun visors, speaker bar, etc. Includes brackets to attach to the windshield frame. Allows windshield to be folded down with out hassle. Can be shipped UPS !
Our Sport Cage kit uses two curved bars (left & right) to attach to the factory roll bar (with the factory "stubs") in place of the stock horizontal bars that connect the windshield frame to factory the roll bar. A cross bar connects the left & right bars together just behind the windshield frame. It slips over the pre-welded stubs and is secured in place with thru-bolts. Floor plates are welded and pre-punched and act as a guide for you to drill your floor. All necessary hardware is provided, including brackets that attach it to the windshield frame. This Sport Cage fits great with hard or soft tops, full or half hard doors. It is built in a jig for accuracy out of 1-3/4" x .120 HREW steel tubing, and is shipped up-painted, bare steel. A Frame Tie-In Kit is available as an option. With full hard doors, you must open the door to crank the window.