Sam's Offroad Custom Dana 60 Axles
 
Sam's Offroad Equipment offers custom Dana 60's made for Jeeps, Toyota's and Tube Chassis rigs. Our axles are custom made to your width, type of locker and gear ratio.

All tube modification's are machined, not butt welded. When checking the competition on axles ask about the warranty. Sam's Offroad is one of the few that offer a one year warranty.

 Dana 60 Axle Options
  • Set up for coil/link or leaf suspension
  • High pinion reverse cut configuration
  • Drum or Disc brakes
  • Auburn Posi Unit
  • Detroit Soft Locker differential
  • ARB Air Locker differential
  • Standard or custom shock mounts
  • High Steer Components
  • 35 Stub Shafts
  • HD Lock Out Hubs, 35 Spline        
  • HD differential cover


    • 35 Stub Shafts


    HD Lock Out Hubs, 35 Spline

    Dana Package Options 1-9:

    Front HP Dana 60 with Locker, Precision Gears, Timken Bearings, Moser inner axles, Tera Lockout Hubs, Spicer U-Joints and 35 spline Stubs, Moog Ball Joints, Factory Ford Knuckles, 5 or 6 lug rotors, Down sized GM calipers and backing plates, HD Diff Cover and gear installation. 
     
    High Pinion with Detroit Locker
    High Pinion with ARB Locker                    
    High pinion with Detroit Electric Locker
    Optional High-Steer
    TJ Brackets Installed
    1 Ton Chromemolly Tie Rod
    1 Ton Chromemolly Drag Length
    $5,095.95
    $5,295.95
    $5,495.95
    $395.95
    $695.95
    $195.00
    $150.00

    2)     Front Dana 60 with Locker, Precision Gears, Timken Bearings, Moser inner axles, Tera Lockout Hubs, Spicer U-Joints and 35 spline Stubs, King Pin Style, Factory Knuckles, 5 or 6 lug rotors, Down sized GM calipers and backing plates, HD Diff Cover and gear installation. 
        
    High Pinion with Detroit Locker                  
    High Pinion with ARB Locker              
    High pinion with Detroit Electric Locker
    Optional High-Steer                                
    TJ Brackets Installed                               
    1 Ton Chromemolly Tie Rod                      
    1 Ton Chromemolly Drag Length               
    		$4,395.95
    $4,595.95
    $4,795.95
    $295.95
    $695.95
    $195.00
    $150.00
            
     
     
    3) Front Tera Constant Radius Dana 60 with Locker, Precision Gears, Timken Bearings, Moser inner axles, Tera Lockout Hubs, Spicer U-Joints and 35 spline Stubs, Moog Ball Joints, Custom Knuckles for High Steer System, 5 or 6 lug rotors, Down sized GM calipers and backing plates, HD Diff Cover and gear installation.    
    High Pinion with Detroit Locker
    High Pinion with ARB Locker
    TJ Brackets Installed
    High Steer brackets with Hardware  
    1 Ton Chromemolly Tie Rod 
    1 Ton Chromemolly Drag Length      		 $5,095.95
    $5,295.95
    $695.95
    $295.00
    $195.00
    $150.00

         

    4) Front Dana 60 with Locker, Precision Gears, Timken Bearings, Moser inner axles, Tera Lockout Hubs, Spicer U-Joints and 30 spline Stubs, Factory Knuckles, 8 lug rotors, HD Diff Cover and gear installation. 
     
    Standard Pinion with Detroit Locker                
    Standard Pinion with ARB Locker                
    Standard pinion with Detroit Electric Locker 
    Optional High-Steer                                   
    TJ Brackets Installed                                  
    1 Ton Chromemolly Tie Rod                           
    1 Ton Chromemolly Drag Length                   
    		$3,795.95
    $3,695.95
    $3,995.95
    $295.95    $695.95
    $195.00
    $150.00
                                       
    5)  Rear High Pinion Dana 60 with Locker, Precision Gears, Timken Bearings, 5 or 6 lug 35 spline Moser inner axles, Ford Motorsports Disc Brakes with E-Brake, Spring Perches, HD Diff Cover and gear installation.               
                                       
    High Pinion with Detroit Locker                       
    High Pinion with ARB Locker                    
    High pinion with Detroit Electric Locker    
    TJ Brackets Installed                      
    Locar Emergency brake kit                      
    Rubber caliper brake lines                       
    Residual Valve                                      
    		$3,695.95
    $3,895.95
    $4,095.95
    $695.95
    $139.95
    $95.95
    $49.95
            
     6 )  Rear Dana 60 with Locker, Precision Gears, Timken Bearings, 5 or 6 lug 35 spline Moser inner axles, Ford Motorsports Disc Brakes with E-Brake, Spring Perches, HD Diff Cover and gear installation.   
      
    Standard Pinion with Detroit Locker  
    Standard Pinion with ARB Locker 
    Standard Pinion with Detroit Electric Locker 
    Locar Emergency brake kit 
    Rubber Caliper Brake Lines 
    Residual valve 
    		 $2,895.00
    $3,095.00
    $3,295.00
    $139.95
    $95.00
    $49.95

      

    7)  Rear Standard Pinion Dana 60, Full Floater 8 lug with Locker, Precision Gears, Timken Bearings, 35 spline Moser inner axles, GM calipers with backing plates, Spring Perches, HD Diff Cover and gear installation. 
     

    Standard Pinion with Detroit Locker 
    Standard Pinion with ARB Locker
    Standard inion with Detroit Electric Locker
    TJ Brackets Installed
    Locar Emergency Brake Kit 
    Rubber Caliper Brake Lines 
    Residual Valve   
    		 $3,695.95
    $3,895.95
    $4,095.95
    $695.00
    $139.95
    $95.95
    $49.95

    8)      Rear Tera Constant Radius Dana 60 with Locker, Precision Gears, Timken Bearings, 5 or 6 lug 35 spline Moser inner axles, Ford Motorsports Disc Brakes with E-Brake, Spring Perches, HD Diff Cover and gear installation.  
      
    High Pinion with Detroit Locker 
    High Pinion with ARB Locker
    Locar Emergency brake kit
    Rubber Caliper Brake Lines 
    Residual valve                                                  
    TJ or XJ Control Arm Brackets                          
    		$4,350.95
    $4,595.95
       $139.95
         $99.95
         $49.95
       $695.95 

             

    All axle configurations available.... Call for special pricing!
            
     

    Dana 60 Rear Axle Assembly

     
    This Axle includes the following:    

    • Detroit Locker

    • New bearings and Seals

    • Heavy Duty differential cover

    • Ring gear

    • Disc brakes with parking brake

    5 lug Standard Rotation  $2895.00
    5 lug High Pinion           $3795.00
    8 lug Standard Rotation  $3750.00
    8 lug High Pinion           $4350.00

    Available Options:
    Air Locker $200 Extra
    Spicer 1410 One Ton Yoke $149.95

     

    Rear Weld on Caliper Brackets 

    for Dana 60 and Dana 44, uses GM D52 series caliper

    		Priced at $75.00 per pair

     

    Rear One Ton Drive Shafts

    Rear 1-1410 shaft.jpg (61348 bytes)

    Sam's Offroad has one ton drive shafts with 1410 Spicer U-Joints.

    This is the setup Sam uses on his brown CJ-7 Jeep

    To fit most applications cost $395.00
         Rear 1410 shaft.jpg (40941 bytes)

     

    Front Rock Crawlin' One Ton Drive Shaft

    Sam's Offroad offers a one ton front drive shaft that has unlimited travel. The front u-joint is a 1410 and the rear is available in a 1410 or CV.  This drive shaft has a 20 spline slip and is offered in a 2 inch or a 2 1/2 inch O.D.

    Front Shaft $449.95
    Front Shaft with CV $549.95

    I have been rock crawlin' my brown CJ-7 using this drive shaft for over two years and have had no problems.
                                                            ~Sam
    Copy of front shaft-1.jpg (13648 bytes)

    click on an image to enlarge 

    We want to be your # 1 source! Contact us with your best deal and we'll try to beat it!

    (918) 446-5535

    Open Monday through Friday 9:00 am to 5:00 pm Central Time