If your running a 4 to 6 inch lift kit on your IFS truck you'll notice that your torsion bars are hanging down. Before the lift kit the torsion bars were tucked tightly up hidden by the frame. With a Realift kit you'll be able to hide your torsion bars again and not hang them up on anything. Plus it looks a whole lot better. Notice the picture above, the Torsion Bar Crossmember and Torsion Bars are not hanging down to ruin your day!

Torsion Bar Relocators are an add on that works on almost all trucks and S.U.V.'s with an off center torsion bar design.

This means that the torsion bars applies torque to the a-arms in an arc fashion, and is not inserted
at the a-arms frame mounted pivot point.

The relocators also require the Torsion Bar cross-member to be moved toward the rear wheels
~ 2.5- 4 inches from it's stock mounting location.
Below is a REALIFT equipped truck